Lowest Price Guarantee - We will match any Competitors Price for any of our Products
FREE Ground Shipping offered with your purchase (within the Continental U.S.)

MINIPURE - Replacement Parts and Optional Accessories
 
MINIPURE - Replacement STER-L-RAY Germicidal UV Lamps
Model # Lamp Part #

Price

 Order
MIN-1 05-1119 $70.00
MIN-1.5 05-1366 $70.00
MIN-3 05-1366 $70.00
MIN-6 05-1370 $70.00
MIN-9 05-0097A $70.00
       
MINIPURE - Replacement Crystal Clear Quartz Sleeves
Model #

Sleeve Part #

 Price  
MIN-1 15-1006A1 $25.00
MIN-1.5 15-1006A2 $25.00
MIN-3 15-1111A $28.00
MIN-6 15-1112A $36.00
MIN-9 15-1006A3 $38.00
 
MINIPURE - Replacement Transformer Ballast
Model # Part # Price  
120v 60 Hz      
MIN-1, MIN-1.5 & MIN 3 10-0010B $65.00  
MIN-6 10-0015B $65.00  
MIN-9 10-0092B $119.00  
       
220v 50 Hz      
MIN-1, MIN-1.5, MIN-3, MIN-6, MIN-9 10-0019B $96.00  
       
12v      
MIN-1, MIN-1.5, MIN-3, MIN-6 10-1201A $135.00  
MIN-9 10-1060 $155.00  
       
MINIPURE - Replacement Parts
Model # Part # Price  
Rubber "O" Ring - Static Gland 00-1108-B 2.25  
       
       
       
       
       
       

MINIPURE - Optional Accessories
       
Sentry Safety Sensor
Sentry Safety Sensor's pilot lamps provide constant visual monitoring of normal operation. In the event of power or lamp failure, the Sentry  Safety Sensor indicates an alarm condition. This sensor can operate an optional Solenoid Valve which stops water flow and can sound an optional Audio Alarm whenever an abnormal condition is detected. For use with all Minipure and Mighty-Pure Ultraviolet Water Purifiers and Sanitron units (up to 20  gpm).
      Total Order
All Models -     $199.00

Audio Alarm

Audio Alarm is activated by the Guardian Ultraviolet Monitor or Sentry  Safety Sensor, and  alerts the user to any malfunction detected. Use of the Audio Alarm is recommended by the U.S. Public Health Service "Criteria for the Acceptability of an Ultraviolet Disinfection Unit". For use with all Sanitron and Mighty-Pure Ultraviolet Water Purifiers that utilize the Guardian Ultraviolet Monitor. Can also be employed by Sanitron, Mighty-Pure  and Minipure units in conjunction with the Sentry Safety Sensor.
      Total Order
All Models -     $62.00
Time Delay Mechanism
Time Delay Mechanism provides a two minute warm-up period during which the ultraviolet lamp achieves full germicidal output before the water is allowed to flow through the ultraviolet water purifier. The Time Delay Mechanism is used in conjunction with, and is electrically connected to,  the Solenoid Valve.

Configurations Available: 120v/50 or 60 Hz, 220v to 240v / 50 or 60 Hz
      Total Order
All Models -     $147.00
Non-Resetable Elapsed Time Indicator
Elapse Time Indicators that are real-time, non-resettable display of a water purifier's operating hours. This is extremely useful for scheduling and recording maintenance and lamp replacement.
For use with all Minipure, Mighty-Pure and Sanitron Ultraviolet Water Purifiers. Configurations Available: 120v / 60 Hz, 220v to 240v / 50 Hz.
      Total Order
All Models -     $215.00
Sure Flow Control Valve
Flow Control Valve limits water flow to the rated capacity through the ultraviolet water purifier. For example, if your water purifier has a maximum rated flow of 12 gallons per minute, a 12 gpm flow control valve installed in the water line before the purifier will automatically prevent the water flow from exceeding that rate. Use of the Flow Control Valve  is recommended by the U.S. Public Health Service "Criteria for the Acceptability of an Ultraviolet Disinfection Unit". For use with all Sanitron and Mighty-Pure and Minipure Ultraviolet Water Purifiers in brass, PVC or Stainless Steel.
PVC

 

   Total Order
MIN-1 (1/2" NPT)     $24.00
MIN-1.5 (1/2" NPT)     $25.00
MIN-3 (3/4" NPT)     $26.00
MIN-6 (3/4" NPT)     $27.00
MIN-9 (3/4" NPT)     $28.00
         
Type 304 - Stainless Steel      
MIN-1 (1/2" NPT)     N/A  
MIN-1.5 (1/2" NPT)     N/A  
MIN-3 (3/4" NPT)     $49.00
MIN-6 (3/4" NPT)     $49.00
MIN-9 (3/4" NPT)     N/A  
Solenoid Valves
Solenoid Valves are operated in conjunction with the 
Guardian Ultraviolet Monitor or Sentry Safety Sensor. These valves prevent water flow through the ultraviolet water purifier whenever an abnormal condition is detected and in the event of power failure. Use of the Solenoid Valve is recommended by the U.S. Public Health Service "Criteria for the Acceptability of an Ultraviolet Disinfection Unit". For use with all Sanitron  and Mighty-Pure Ultraviolet Water Purifiers that utilize the Guardian  Ultraviolet Monitor. Can also be employed by Sanitron , Mighty-Pure  and Minipure  units in conjunction with the Sentry  Safety Sensors. Available in 118v / 50 or 60 Hz or 220v / 50 or 60 Hz. Units manufactured in nylon and brass. Models available for pressure or gravity flows.

 

     Total Order

All Models (3/4" NPT) Brass

   $205.00

 

        

All Models (3/4" NPT) Nylon*

   $145.00

*Nylon only available in 120v 50/60Hhz.

    
Stainless Steel Wall Mounting Kit
Clamp-Type Mounting Kits are stainless steel mounting kits that provide a neat, convenient means to wall or surface mount Minipure Ultraviolet Water Purifiers. The kit includes a pre-drilled set of brackets and clamping rings.
 

Model #

 Part #     Total Order
MIN-1 25-0390B     $27.00
MIN-1.5 25-0390B     $27.00
MIN-3 25-0415A     $35.00
MIN-6 25-0415A     $35.00
MIN-9 25-0415A     $35.00
Lowest Price Guarantee - We will match any Competitors Price for any of our Products
FREE Ground Shipping offered with your purchase (within the Continental U.S.)